(800) 423-5008 • (805) 523-1800
Getting sheet goods up onto the table saw can be dangerous and back-breaking. The LegUp mounts quickly and easily to the vertical edge of the table saw or horizontally to the edge of the fence rail. Simply place the bottom of one end of the plywood or other sheet stock on the ‘hook’ and effortlessly rotate or ‘flip’ the material onto the saw table.
When trying to place a 4’ x 8’ sheet of plywood or other material onto the table saw the panel can easily slip in the process or accidentally bump into the blade causing the board to dangerously kick back at the operator. Additionally the process of bending, twisting and lifting the panel can easily ‘throw out’ the back.
The LegUp is a powder-coated flat steel bar (or ‘leg’) which mounts to the edge of your table saw or to the fence rail. That ‘leg’ has a ‘foot’ or ‘hook’ at the bottom that sits just a couple of inches above the floor.
● The bottom front edge of the panel is placed onto the foot.
● The LegUp serves as a fulcrum with a sufficient portion of a panel rising above the pivot point to make it easy to rotate or ‘flip’ that panel onto the top of the saw table with the action and ease of a seesaw or teeter-totter.
● Then, as the operator slides the panel towards the saw fence the LegUp drops down, returning to its vertical position ready for the next panel.
It’s simple; it works surprisingly well; it saves the back, neck, hands and arms; it lasts forever!
Landon Innovations LLC
Toll Free: 800-423-5008 (US & Canada)
11968 Challenger Court
Moorpark, CA 93021 USA
Fill in your details below and one of our team will contact you.
| © 2014 Gorilla Gripper. All rights reserved